DOI: 10.1021/acs.analchem.6b03969

Authors
Guo, L. B. ; Hao, Z. Q. ; Li, J. M. ; Li, X. Y. ; Lu, Y. F. ; Yang, X. Y. ; Yu, H. W. ; Zeng, X. Y. ; Zhou, R.

Keywords

ACCURACY IMPROVEMENT; WAVELET TRANSFORM; LIBS; SPECTROMETRY; PEAKS

Abstract

The complex and serious spectral interference makes it difficult to detect trace elements in soil using laser induced breakdown spectroscopy (LIBS). To address it, LIBS-assisted by laser-induced fluorescence (LIES-LIP) was applied to selectively enhance the spectral intensities of the interfered lines. Utilizing this selective enhancement effect, all the interference lines could be eliminated. As an example, the Pb I 405.78 nm line was enhanced selectively. The results showed that the determination coefficient (R-2) of calibration curve (Pb concentration range = 14-94 ppm), the relative standard deviation (RSD) of spectral intensities, and the limit of detection (LOD) for Pb element were improved from 0.6235 to 0.9802, 10.18% to 4.77%, and 24 ppm to 0.6 ppm using LIBS-LIF, respectively. These demonstrate that LIBS-LIF can eliminate spectral interference effectively and improve the ability of LIBS to detect trace heavy metals in soil.

DOI: 10.1016/j.talanta.2016.10.094

Authors
Guo, L. B. ; Hao, Z. Q. ; Li, J. M. ; Li, X. Y. ; Lu, Y. F. ; Shen, M. ; Yi, R. X. ; Yu, H. W. ; Zeng, X. Y.

Keywords

Laser-induced breakdown spectroscopy; Rare earth elements; Aqueous solution; Surface-enhanced;RARE-EARTH-ELEMENTS; QUANTITATIVE-ANALYSIS; ACCURACY IMPROVEMENT; EMISSION; SAMPLES; LIBS; EXTRACTION; LIQUIDS; WATER

Abstract

Determination of rare earth elements (REEs) plays an important role in the extraction process. In this work, surface-enhanced laser-induced breakdownspectroscopy (SENLIBS) was introduced to detect REEs (lanthanum, cerium, praseodymium, and neodymium elements) in an aqueous solution. The emission lines of La II 394.91 nm, Ce II 418.66 nm, Pr II 422.29 nm, and Nd II 406.10 nm were selected for quantitative analysis by drying the analytical samples on a Zn metal substrate surface and optimizing the experimental parameters. The results showed that the limits of detection (LoDs) for determining La, Ce, Pr, and Nd elements can reach to 0.85, 4.07, 2.97, and 10.98 mu g mL(-1), respectively, which proved that SENLIBS is a feasible method for determining REEs.